光产品培训目录
光 产 品 培 训 目 录
OPTICAL
TRAINING CATALOG
2 0 0 6
北电网络大中国区光培训中心
前 言
北电网络大中国区光培训中心座落于广东省顺德市广东北电通信设备有限公司园区内,配有完善的实验设备和计算机辅助教学系统,为学生提供真实的操作环境.实验室设备齐全,几乎包含了北电网络光产品中从低端到高端的全部产品,既有传统的SDH低容量产品TN-1X,OM4100/4200,还有适用于骨干网中可扩展的10 Gbps多业务光传输机OPTera Connect DX,和满足开放式密集波分复用(DWDM)系统中超高容量传输需求的OPTera Long Haul设备等共计30多台.同时,我们还成功的实现了海外其它培训中心对我们的实验室资源共享,极大地扩展了大中国区客户可用的培训资源.
作为北电网络的全球培训中心之一,我们与海外培训中心一致,采用全球统一的授课模式与授课内容,为客户提供全球标准化的服务.我们拥有一支非常优秀的团队,培训老师具有非常丰富的海内外工作经验及较高的英语水平,获得了EMEA UK培训中心的海外授课认证,目前可以提供光产品系列培训20多门课程.
北电网络大中国区光培训中心以客户的成功为我们的成功.我们与客户一起成长!
北电网络大中国区光培训中心
二零零六年二月
TABLE OF CONTENTS
目 录
OPTICAL TRAINING COURSE DESCRIPTIONS
课程描述
Class size: 12 students max, 6 students min
每班人数:最多12人, 最少6人
================================================================
SDH Technical Overview (5235)
SDH技术简介
1 DAY
Overview
Overview
概述
This overview course provides instruction on the basic SDH
该课程提供关于SDH的简介
Audience
培训对象
Operation and Maintenance personnel and other staff who have an involvement or responsibility in the day to day running of the SDH equipment.
SDH设备操作维护人员
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Appreciate the limitations of the PDH
了解PDH系统的局限性
Appreciate the advantages of the SDH
了解SDH的优点
Understand the SDH multiplexing structure
了解SDH复用结构
Understand the STM frame structure
了解STM帧结构
Explain how PDH signals are mapped into an STM-1 frame
解释PDH信号如何映射到STM-1
Explain the functions of the Path and Section Overheads associated with SDH
解释SDH中开销的功能
Explain the SDH Pointer processing
解释SDH指针处理
Explain the Management levels and functions within the SDH
解释SDH管理
Course Summary
课程简介
PDH overview
PDH简介
PDH limitations
PDH的局限性
SDH standards
SDH标准
Advantages of SDH
SDH的优点
SDH multiplexing structure
SDH的复用结构
STM-1/STM-N frame structure
STM-1/STM-N 帧结构
PDH mapping
PDH 系统映射
Overhead
开销
Pointer processing
指针处理
SDH management
SDH 管理
================================================================
TN 01X Operations and Maintenance (75000)
TN-1X 操作与维护
3DAYS
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations and maintenance of the TN-1X
该课程提供TN-1X设备的操作与维护方面的知识
Audience
培训对象
Operation and Maintenance personnel and other staff who have an involvement or responsibility in the day to day running of the TN-1X equipment.
操作维护人员或负责TN-1X日常维护人员
Prerequisites
课程基础
Experience in PCM, Higher Order Digital Trans mission systems or attendance on: Introduction to telecommunications.
学员应具有一定PCM或高阶数字传输体系经验,具有一定电信网知识.
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Understand the optical safety and static precautions procedures
了解安全注意事项和静电防护措施
Appreciate why SDH
掌握SDH知识
Describe the different applications of the TN-1X
描述 TN-1X的不同应用
Describe the basic building blocks, features and options of the TN-1X
描述TN-1X的基本模块,功能和配置
Use the local terminal (CATT configuration and test tool ) for setting up, monitoring and fault diagnosing the TN-1X in the network
使用本地终端对 TN-1X进行创建,监视和故障诊断
Demonstrate familiarity with the TN-1X equipment in relation to unit position, interfaces and options
熟悉 TN-1X 设备的单元位置,接口和配置
Demonstrate an understanding of the basic function of each application unit
熟悉每个应用单元的基本功能
Explain briefly the Synchronisation implication of SDH elements
简单解释SDH网元同步原理
Describe the factors involved in setting up and implementing a ring network
描述创建一个环行网的要素
Demonstrate an understanding of the alarm and performance monitoring system
熟悉告警和性能监控系统
Course Summary
课程简介
Safety and precautions
安全注意事项
Applications
应用
Hardware architecture
硬件结构
System signal flow
系统信号流程
Craft Access Terminal(CAT)
本机接入终端
Configuration
配置
Synchronization
同步
Protection switching
保护倒换
Service connections
业务连接
Alarms
告警
Performance
性能
Troubleshooting
故障处理
================================================================
TN 01C Operations and Maintenance (75095)
TN-1C 操作与维护
2 DAYS
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations and maintenance of the TN-1C
该课程提供TN-1C设备的操作与维护方面的知识
Audience
培训对象
Operation and Maintenance personnel and other staff who have an involvement or responsibility in the day to day running of the TN-1C equipment.
操作维护人员或负责TN-1C日常维护人员
Prerequisites
课程基础
Experience in PCM, Higher Order Digital Trans mission systems or attendance on: Introduction to telecommunications.
学员应具有一定PCM或高阶数字传输体系经验,具有一定电信网知识.
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Understand the optical safety and static precautions procedures
了解安全注意事项和静电防护措施
Appreciate why SDH
掌握SDH知识
Understand the applications of theTN-1C
了解TN-1C的不同应用
Describe the basic building blocks, features and options of the TN-1C
描述TN-1C的基本模块,功能和配置
Use the local terminal (CAT) for setting up, monitoring and fault diagnosing the TN-1C in the network
使用本地终端对 TN-1C进行创建,监视和故障诊断
Demonstrate understanding of the basic function of each unit
了解每一单元的基本功能
Understand the factors involved in setting up and implementing a network
描述创建一个网络的要素
Demonstrate an understanding of the alarm and performance monitoring system
熟悉告警和性能监控系统
Course Summary
课程简介
Safety and precautions
安全注意事项
Applications
应用
Hardware architecture
硬件结构
System signal flow
系统信号流程
Craft Access Terminal(CAT)
本机接入终端
Configuration
配置
Synchronization
同步
Protection switching
保护倒换
Service connections
业务连接
Alarms
告警
Performance
性能
Troubleshooting
故障处理
================================================================
OPTera Metro 4100/4150/4200 Operations and Maintenance (5695AEN)
OM4100/4150/4200操作与维护
4 DAYS
Instructor Led
Overview
概述
This hands on course provides instruction on the operation andmaintenance of the OPTera Metro Series 4100 (Release 4.7), 4150(Release 7.0), 4200 (Release 4.0) and TN-4T (Release 1) (OM4**0 2Mbit/s 1:N card protection extension shelf) equipment.
该课程提供OM4100/4150/4200/ 设备的操作与维护方面的知识
Audience
培训对象
Operations and Maintenance personnel and other staff who have aninvolvement or responsibility in the day to day running of the OPTeraMetro Series 4100/4150/4200/TN-4T equipment.
操作维护人员或负责 OM4100/4150/4200 日常维护人员
Prerequisites
课程基础
Experience in PCM or higher order Digital Transmission Systems.Experience in SDH or attendance on SDH Basic (Course: 55230) andSDH Technical (Course: 55235). Background knowledge of TCP/IP or attendance on Understanding TCP/IP (Course: 55110). PC literate and familiarity with Windows 95/98.
学员应具有一定PCM或高阶数字传输体系经验.具有TCP/IP相关知识,以及熟练操作视窗95/98
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Understand optical and static safety precautions and procedures.
了解安全注意事项和静电防护措施
Describe the applications of the OPTera Metro Series 4100/4150/4200/TN-4T , DWDM, SFW and LH Extra Reach operation.
描述 OM4100/4150/4200/TN-4T 的应用
Explain how OPTera Metro 4100/4150/4200/TN-4T are managed.
阐述 如何管理 OM4100/4150/4200/TN-4T
Describe the OPTera Metro 4100/4150/4200/TN-4T basic building blocks, card options, positions and modes of operation.
描述 OM4100/4150/4200/TN-4T 的基本模块,功能和配置
Have an overview only understanding of the OPE100 tributary card.
简单了解OPE100盘
Use the Command Line User Interface (CLUI) for configuring and fault diagnosis of the OPTera Metro Series 4100/4150/4200/TN-4T.
使用命令行窗口对 OM4100/4150/4200/TN-4T 进行配置和故障诊断
Explain SDH network synchronisation and the OPTera Metro Series 4100/4150/4200/TN-4T synchronisation features and options.
阐述SDH网络同步和 OM4100/4150/4200/TN-4T同步特性及配置
Provision unprotected and protected service connections in various network configurations with different protection schemes.
在不同网络配置情况下指配非保护和保护连接
Demonstrate an understanding of the alarm monitoring system.
了解告警监视系统
Demonstrate an understanding of performance monitoring.
了解性能监测
Understand SDH data communication operation including IS-IS Level 1/2 routing (OM4150/4200 only) and OSI tunnelling via TCP/IP (OM4150/4200 only).
了解SDH 数据通信
Understand EOW function (OM4**0 only).
了解EOW功能
Explain software and configuration management on the OPTera Metro 4100/4150/4200/TN-4T.
解释软件和配置的管理
Carry out fault finding on an OPTera Metro Series 4100/4150/4200/TN-4T network.
故障处理
Course Summary
课程简介
Safety and precautions
安全注意事项
Network, DWDM, SFW and LH Extra Reach applications.
应用
NE management(EC-1/CAT)
网元管理
Command Line User Interface (CLUI)
命令行用户窗口
Hardware architecture
硬件结构
Software features
软件特性
Connection management
连接管理
Synchronization
同步
SEMF and traffic protection schemes
SEMF和业务保护倒换
Alarms
告警
Performance monitoring
性能监测
Data communications.
数据通信
Software and configuration management.
软件管理及配置
Fault finding
故障处理
================================================================
OM 4000 Serials OPE 100 Basic Installation, Commissioning, and Maintenance (74010)
OPE100 在OM4100中的 操作与维护
3 DAYS
Instructor Led
Overview
概述
This course provides instruction on the installation and basic commissioning ofthe OPTera Packet Edge 100 card as used in the OPTera Metro 4000 MultiService Platform (MSP)
该课程提供OPE100 设备的安装与基本指配方面的知识
Audience
培训对象
This course is intended for Installation, Commissioning and Support engineerswho have an involvement in, or responsibility for, the commissioning of theOPTera Packet Edge 100 card in the OPTera Metro 4100 MSP.
负责 OPE100安装,指配及技术支持工程师
Prerequisites
课程基础
Attendance on an TCP/IP or IP Networking course. Example course is:55110 Understanding TCP/IP - Instructor Lead.
参加过有关TCP/IP或IP网络课程.如课程55110,TCP/IP基础
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Detail safety requirements as related to the OPTera Packet Edge 100(OPE100) card
了解OPE100相关的安全注意事项
Explain typical system applications.
描述典型系统应用
Install the OPE100 card in the OPTera Metro 4100 MSP.
在OM4100 MSP安装OPE100
Use CLUI Punch Through to communicate with the OPE100
使用Punch Through窗口与OPE100进行通信
Configure the console port and use this to communicate with the OPE100.
配置console端口
Set-up VLANs and test for correct operation
建立VLAN
Set-up Spanning Tree Groups
创建Spanning Tree组
Use diagnostics
诊断
Set-up and test LAN to LAN connectivity using Trib to Trib connections
创建支路到支路连接实现LAN之间连接
Set-up and test LAN to LAN connectivity over the OPTera Metro 4100 ring
通过OM4100创建LAN之间连接
Set-up RMON
创建RMON
Detail the management options available for OPE100.
学习OPE100相关管理选择
Course Summary
课程简介
Safety and precautions
安全注意事项
Applications
应用
Hardware architecture
硬件结构
Equipment installation.
设备安装
Configuration.
配置
System testing.
系统测试
System Management.
系统管理
================================================================
OPTera Metro 3000 Serials Overview (CH5617)
OPTera Metro 3000 系列产品简介
1 DAYS
Instructor Led
Course Description
课程描述
This course is meant to be an introduction to the fundamentals of the OPTera
Metro 3000 series. This includes the OPTera Metro 3100, 3300, 3400 and 3500.
If your company does not use all of these, you may wish to skip some of the
information in this book.
本课程提供关于OM3000系统产品概述
Audience
培训对象
Anyone who need to understand OM3000 series products
任何想了解OM3000系列产品的人员.
Prerequisites
课程基础
None
Course Summary
课程简介
OM3000 series introduction
产品介绍
Configuration and application
配置应用
Hardware Description
硬件描述
Bandwidth Management
带宽管理
Shelf Signal Flow.
子架信号流程
DWDM for the OPTera Metro 3500.
DWDM在OM3500中的应用
Nortel Networks Documentation
Nortel 文档简介
Objectives
目标
Upon successful completion of this course, you will be able to:
成功完成此次课程你将能够做到:
OC
Describe the role of the OPTera Metro 3000 series network elements at the network level
描述 OM3000系列产品在网络中作用
Describe the configurations and applications
描述配置及应用
Identify, according to location, all hardware on the shelf and explain the function of each circuit pack
硬件介绍
Describe the electrical and optical signal flow
描述信号流程
Describe the implementation of DWDM in the OM3500
描述DWDM在OM3000中的应用
Describe the main Nortel Networks documentation
描述Nortel 主要相关文档
OPTera Metro 3000 Serials Operations and Maintenance (CH5510)
OPTera Metro 3000 系列产品 操作与维护概述
3 Days
Instructor Led
On-Site
Course Overview
课程描述
OM3000 series Operations and Maintenance provides lecture and hands-on exercises on the operation, administration, maintenance and provisioning OM3000 series products
本课程提供关于OM3000系统产品操作维护的相关介绍及操作.
Audience
培训对象
Anyone responsible for installing, operating, administering, provisioning and maintaining OM3000 series
负责OM3000系列操作维护人员.
Prerequisites
课程基础
Basic Telecommunications Skills
基础通信技能
Knowledge of SDH/SONET
SDH/SONET的相关知识
Course Summary
课程简介
OM3000 series Product Overview
产品概述
User Interfaces and Management Components Overview
用户接口及管理组件简介
System Administration and Security
系统管理及安全防护知识
Bandwidth Management
带宽管理
Protection Switching
保护倒换
Synchronization
时钟同步
Alarms processing
故障管理
performance monitoring
性能监测
Objectives
目标
Upon successful completion of this course, you will be able to :
成功完成此次课程你将能够做到:
OC
Find the Nortel Networks Technical Publications (NTP) required to operate an OM3000 series system
NTP手册查询
Describe the OM3000 series hardware, configurations and applications
描述OM3000 系列硬件,配置和应用
Administer an OM3000 series system using Preside Site Manager
用 Preside Site Manager管理OM3000系列产品
Provision OM3000 series equipment and facilities
指配OM3000系列硬件设备和工具信号
Provision cross-connects and perform bandwidth management
指配交叉连接和执行带宽管理
Operate protection switching
操作保护倒换
Provision network synchronization
指配网络同步
Perform performance and fault management
性能监测和故障管理
Training Environment
培训环境
on-site training, customer site should meet the requirements as below:
现场培训,客户端应提供以下培训环境:
Training facilities for students to practice, including PCs and equipments;
供学员操作的培训设施, 包括培训设备和可登陆设备的个人电脑
Classroom with power, projector, and whiteboard
配备电源,投影仪,白板,白板笔的培训教室
OPTera Metro 5000 Serials Overview (79032)
OPTera Metro 5000 系列产品简介
1 Days
Instructor Led
On-Site
Overview
概述
This course provides Overview of the OPTera Metro 5200 System
该课程提供 OPTera Metro 5000 系列产品系统概述培训
Audience
培训对象
This course is intended for staff who want to have some knowledge for OPTera Metro 5200 systems.
需要了解OPTera Metro 5000系列产品的人员
Prerequisites
课程基础
None
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Understand the place of OPTera Metro 5200 in Nortel Networks' OPTera product Protfolio
了解 OPTera Metro 5200在北电网络OPTera 系列产品的位置
Explain typical system applications
阐述典型系统应用
describe the basic System building blocks
描述系统的基本构件
Detail OPTera Metro 5200 hardware
详述硬件
Appreciate the user software interface
了解用户软件接口
Understand traffic provisioning
了解业务指配
Appreciate protection switching
了解保护倒换
Course Summary
课程简介
Applications
应用
System architecture
系统框架
Hardware
硬件
software
软件
Traffic management
业务管理
Protection switching
保护倒换
Training Environment
培训环境
on-site training, customer site should meet the requirements as below:
现场培训,客户端应提供以下培训环境:
Classroom with power, projector, and whiteboard
配备电源,投影仪,白板,白板笔的培训教室
================================================================
OPTera Metro 5000 Serials Operations Maintenance (5711B)
OPTera Metro 5000 系列产品-操作与维护
3 DAYS
Instructor Led
On-Site
Course Description
课程描述
OM5000 series Operations and Maintenance provides lecture and hands-on exercises on the operation, administration, maintenance and provisioning of OM5000 series products
本课程提供关于OM5000系统操作维护的相关介绍及操作.
Audience
培训对象
Anyone responsible for installing, operating, administering, provisioning and maintaining OM5000 series
负责OM5000系列产品操作维护人员.
Prerequisites
课程基础
Basic Telecommunications Skills
基础通信技能
Knowledge of DWDM
DWDM的相关知识
Course Summary
课程简介
OM5000 series Product Overview
产品概述
User Interfaces and Management Components Overview
用户接口及管理组件简介
System Administration and Security
系统管理及安全防护知识
Protection Switching
保护倒换
Alarms processing
故障管理
performance monitoring
性能监测
OPTera Metro 5200 Operation
系统具体操作
Objectives
目标
Upon successful completion of this course, you will be able to :
成功完成此次课程你将能够做到:
Find the Nortel Networks Technical Publications (NTP) required to operate an OM5000 series system
NTP手册查询
OC
Identify safety precautions
明确安全防护
Describe the different applications and configurations of OPTera Metro 5200 systems
描述OPTera Metro 5200 系统应用配置
Identify OPTera Metro 5200 system components.
明确OPTera Metro 5200 系统元器件
Describe signal flow in an OPTera Metro 5200 system.
描述信号流程
Identify OPTera Metro 5200 circuit pack provisioning requirements.
明确卡板指配.
Connect the SMI to the OPTera Metro 5200 system, log in to the shelf and monitor the system.
子架用户接口界面登陆及系统监控
Identify Performance Monitoring procedures.
明确性能监控
Fault management
故障管理
Training Environment
培训环境
on-site training, customer site should meet the requirements as below:
现场培训,客户端应提供以下培训环境:
Training facilities for students to practice, including PCs and equipments;
供学员操作的培训设施, 包括培训设备和可登陆设备的个人电脑
Classroom with power, projector, and whiteboard
配备电源,投影仪,白板,白板笔的培训教室
OPTera Multiservice Edge 6500 Operations and Maintenance (5241)
OME 6500 操作与维护
3 DAYS
Instructor Led
On-Site
Course Description
课程描述
Optical Multiservice Edge 6500 Operations and Maintenance provides lecture and hands-on exercises on the operation, administration, maintenance and provisioning of the Optical Multiservice Edge 6500.
本课程提供关于OME6500系统操作维护的相关介绍及操作.
Audience
培训对象
Anyone responsible for installing, operating, administering, provisioning and maintaining Optical Multiservice Edge 6500
负责OME6500操作维护人员.
Prerequisite Skills
必备技能
・ Basic telecommunication knowledge
基础的电信知识
・ A knowledge and/or experience of Optical Transport technology is recommended
光传输技术知识和经验
Objectives
目标
Upon successful completion of this course, the participants will be able to:
成功完成此次课程你将能够做到:
Use the user interfaces and management components
使用用户窗口界面及相关管理部分
Find required information and follow required procedures in the documentation
在技术手册中找到需要的信息及相关步骤
Identify basic components and replacement procedures.
明确产品的基本组成及替换步骤
Provision an OME 6500 network (shelves)
指配OME6500网络(子架)
Identify Performance Monitoring procedures.
明确性能监测步骤
Troubleshoot an OME 6500 network.
OME6500网络故障处理
Course Summary
课程简介
OME6500 Product Overview
OME6500简介
Documentation
产品手册
Safety Guidelines
安全须知
User Interface
用户界面
Administration
管理
Hardware Overview
硬件简介
Data Communications
数据通信
Synchronization
系统同步
Provisioning and Connections
指配和连接
Protection Switching
保护倒换
Performance Monitoring
性能监测
Fault Management
故障管理
Training Environment
培训环境
on-site training, customer site should meet the requirements as below:
现场培训,客户端应提供以下培训环境:
Training facilities for students to practice, including PCs and equipments;
供学员操作的培训设施, 包括培训设备和可登陆设备的个人电脑
Classroom with power, projector, and whiteboard
配备电源,投影仪,白板,白板笔的培训教室
Common Photonic Layer (CPL) Operations and Maintenance (5861)
CPL 操作与维护
2 DAYS
Instructor Led
On-Site
Prerequisite Skills
必备技能
・ Basic telecommunication knowledge
基础的电信知识
・ A knowledge and/or experience of Optical Transport technology is recommended
光传输技术知识和经验
Course Description
课程描述
Common Photonic Layer(CPL) Operations and Maintenance provides lecture and hands-on exercises on the operation, administration, maintenance and provisioning of the Common Photonic Layer
本课程提供关于CPL系统操作维护的相关介绍及操作.
Audience
培训对象
Anyone responsible for installing, operating, administering, provisioning and maintaining Common Photonic Layer
负责CPL操作维护人员.
Course Summary
课程简介
CPL Product Overview
简介
Documentation
产品手册
Safety Guidelines
安全须知
Graphical User Interface (GUI)
用户界面
Hardware Overview
硬件简介
Data Communications
数据通信
Alarms processing
故障管理
performance monitoring
性能监测
Optical Control and adjacency
光控制和领接
Objectives
目标
Upon successful completion of this course, you will be able to :
成功完成此次课程你将能够做到:
・ Identify the use, role and main advantages of CPL in a network
明确CPL在网络中的用途及主要优点
・ Identify network applications available using CPL
明确CPL 网络应用
・ Identify the CPL wavelength plan and capacity statement
明确CPL波长分配及容量
・ Identify safety guidelines
明确安全防护
・ Identify CPL shelf hardware
明确CPL 子架硬件
・ Identify shelf equipping rules
明确CPL子架配置规则
・ Describe circuit packs function and equipping rules
描述机盘功能及配置规则
・ Describe access to the Craft GUI Interface
描述登陆CPL网元GUI 接口
・ Perform basic activities of the Craft GUI interface
讲解并练习基本操作
・ Identify the CPL different data communications interfaces
明确CPL不同的数据接口
・ Describe the different CPL DCN connectivity strategy
描述不同的CPL DCN 连接
・ Identify the CPL Optical controller hierarchy
明确CPL光控制器等级
・ List the two possible adjacency and their requirements
列出两种可能的邻接及他们的需求
・ Perform end-to-end channel provisioning
执行短道短的通道指配
・ Describe alarm clearing processes and techniques
描述告警清楚过程及方法
・ Identify the different performance monitoring parameters
描述不同的性能监测参数
・ Identify the different performance monitoring access points
描述不同的性能监测接入点
Training Environment
培训环境
on-site training, customer site should meet the requirements as below:
现场培训,客户端应提供以下培训环境:
Training facilities for students to practice, including PCs and equipments;
供学员操作的培训设施, 包括培训设备和可登陆设备的个人电脑
Classroom with power, projector, and whiteboard
配备电源,投影仪,白板,白板笔的培训教室
================================================================
OPTera Connect DX Operations and Maintenance (75593)
OPTera Connect DX 操作与维护
3 Days
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations and Maintenance of the Nortel OPTera Connect DX.
该课程提供 OPTera Connect DX 设备操作与维护方面的知识
Audience
培训对象
Operations and Maintenance personnel and other staff who have an involvement or responsibility in the day to day running of the OPTera Connect DX equipment.
操作维护人员或负责 OPTera Connect DX 日常维护人员
Prerequisites
课程基础
Experience in Higher Order Digital Transmission systems
学员应具有一定高阶数字传输体系经验
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
list the safety hazards associated with OPTera Connect DX
熟悉与 OPTera Connect DX有关的安全知识
understand OPTera Connect DX network applications
了解 OPTera Connect DX 网络应用
describe SDH principles, multiplexing hierarchy and frame structures
描述SDH原理,复用过程与帧结构
explain the essential features of the OPTera Connect DX ring ADM as deployed in ring networks
说明在环网中ADM配置的 OPTera Connect DX 的基本功能
describe the basic building blocks of the OPTera Connect DX ADM
描述 OPTera Connect DX ADM 基本模块
use the local terminal nodal UI for setting up, monitoring and fault diagnosis in the OPTera Connect DX networks element
通过本地终端创建 OPTera Connect DX网元并进行监视和故障诊断
commission and modify a ring network
建立和修改一个环网
set up service connections in a ring network
在环网中建立业务连接
explain the operation of protection switching
说明保护连接的操作
use the NE and POPC interfaces to access the available information and understand the significance of that information
利用网元和POPC接口接收有用的信息并了解这些信息的意义
understand the synchronisation system in the OPTera Connect DX element
了解 OPTera Connect DX 网元的同步系统
demonstrate an understanding of the alarm monitoring system
熟悉告警监视系统
diagnose faults using the OAM interfaces on an OPTera Connect DX networks element
利用 OPTera Connect DX 网元的网管接口进行故障诊断
Course Summary
课程简介
Safety and precautions
安全注意事项
SDH
SDH原理
Applications
应用
Hardware architecture
硬件结构
System signal flow
系统信号流程
Nodal user interface
用户节点接口
Configuration
配置
Synchronisation
同步
Protection switching
保护倒换
Service connections
业务连接
Alarms
告警
Troubleshooting
故障处理
================================================================
OPTera LH Operations and Maintenance (75591)
OPTera LH 操作与维护
3 Days
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations and Maintenance of the Nortel OPTera LH.
该课程提供 OPTera LH 设备操作与维护方面的知识
Audience
培训对象
Operations and Maintenance personnel and other staff who have an involvement or responsibility in the day to day running of the OPTera LH equipment.
操作维护人员或负责 OPTera LH 日常维护人员
Prerequisites
课程基础
Experience in Higher Order Digital Transmission systems, Completion of SDH basics, SDH Technical, TN-16X or TN-64X O&M courses
学员应具有一定高阶数字传输系统经验,完成了SDH基础,TN-16X 或TN-64X 操作维护课程
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
list the safety hazards associated with OPTera LH
熟悉与 OPTera LH有关的安全知识
understand OPTera LH applications
了解 OPTera LH应用
explain the essential features of the OPTera LH deployment in ring networks
说明在环网中LH 的基本功能
describe the basic building blocks of the OPTera LH System
描述 OPTera LH 系统的基本构件
use the local terminal nodal UI for setting up, monitoring and fault diagnosis in the OPTera LH optical units
在 OPTera LH 光单元中通过本地终端进行系统创建,监视和故障诊断
Set-up the OPTera LH given defined parameters
根据给定参数配置OPTera LH
use the NE interfaces to access the available information and understand the significance of that information
利用网元接口访问有用的信息并了解这些信息的意义
demonstrate an understanding of the alarm monitoring system
熟悉告警监视系统
Course Summary
课程简介
Safety and precautions
安全注意事项
OPTera LH Applications
应用
Hardware architecture
硬件结构
System signal flow
系统信号流程
Nodal user interface
用户节点接口
Configuration
配置
Alarms
告警
================================================================
OPTera LH 1600 Operations,Maintenance and Provision (8157)
OPTera LH 1600 操作, 维护与指配
3 Days
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations and Maintenance of the Nortel OPTera LH 1600 Repeater, Combiner and Amplifier.
该课程提供 OPTera LH 1600 Repeater, Combiner Amplifier 设备操作与维护方面的知识
Audience
培训对象
Anyone who respomsible for OM&P of OPTera LH 1600
负责 OPTera LH1600 操作维护人员
Prerequisites
课程基础
Experience of Completion of OC192/TN-64X or OPTera Repeater/combiner and DWDM/MOR Maintenance training or equivalent before this course
完成OC192/TN-64X 或OPTera rpt/comb 和 DWDM/MOR维护课程或等价课程
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Describe OPTera LH 1600 fundamentals applications
阐述 OPTera LH 1600 基本应用
Identify OPTera LH 1600 Hardware
了解 OPTera LH 1600 硬件
Describe OPTera LH 1600 configurations, signal flow and data communications
阐述 OPTera LH 1600 配置,信号流程和数据通讯
use the NE interfaces to access the available information and understand the significance of that information
利用网元接口访问有用的信息并了解这些信息的意义
demonstrate an understanding of the alarm monitoring system
熟悉告警监视系统
Course Summary
课程简介
Safety and precautions
安全注意事项
OPTera LH 1600 Applications
应用
Hardware architecture
硬件结构
System signal flow
系统信号流程
Nodal user interface
用户节点接口
Configuration
配置
Alarms
告警
================================================================
OPC Administration Course (65017)
OPC管理教程
1DAYS
Instructor Led
Overview
概述
This one-day course introduces detailed information about the Operations Controller (OPC) platform, organized around a description of the OPC file system and software tools available to the user for the purpose of checking OPC proper functioning.
该课程提供 OPC应用平台的介绍,主要涉及OPC文件系统及用于能够检查OPC是否正常运行的软件工具.
Audience
培训对象
Network Operations Center personnel in charge of network monitoring,analysis and troubleshooting.
负责网络监控,分析及故障处理的网管中心工作人员
Prerequisites
课程基础
Knowledge of Preside Operations and the GNB interface. Understanding of OPC role desirable but review material included.
学员应具有一定关于Preside操作及GNB窗口的了解
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
OPC functions
OPC的功能
OPC applications
OPC的应用
Log in and out
登录和退出
OPC base operation
OPC 基本操作
Understand the access rights of each duty class
了解每一任务层正确的接入
Understand the major OPC processess and how to check their status
了解OPC的主要进程及检查它们的状态
Check and control system processess
检查及控制系统的程序
Test reachability of network elements
测试登录网元
OPC Troubleshooting
OPC故障处理
Course Summary
课程简介
OPC functions
OPC功能
hardware architecture
硬件结构
OPC general toolsI introduction
OPC常用工具介绍
OPC configuration
OPC 配置
OPC file system description
OPC 系统文件介绍
OPC troubleshooting guide
OPC 故障排除
================================================================
TN 0MS EC-1 Operators (75052)
TN-MS EC-1 操作员 教程
2 DAYS
Instructor Led
Overview
概述
This hands-on course provides instruction on the operations of the Nortel TN-MS EC-1 Rel 15.
该课程提供 TN-MS EC-1 Rel 15.操作与维护方面的知识
Audience
培训对象
Network Managers, Network Controllers, Communications Managers, Technical Support Staff and other staff responsible for the day to day operation of TN-1networks
网络管理人员, 网络控制人员, 通信管理人员, 技术支持人员及负责TN-1网络日常维护人员
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Identify the TN-MS component parts
掌握TN-MS的构成
Use the mouse and keyboard within a HP-VUE
在 HP-VUE 中鼠标和键盘的使用
Log in and out
登录和退出
Understand the access rights of each duty class
了解每一任务层正确的接入
Configure a new network
配置新网络
re-configure an existing network
重新配置现有网络
understand the reports function on the TN-MS
了解TN-MS报告功能
perform maintenance function
掌握维护功能
perform Log management
熟悉记录管理
perform Fault management
熟悉故障管理
Course Summary
课程简介
hardware architecture
硬件结构
general user facilities
用户常用设施
configuration management
配置管理
connection management
连接管理
alarm monitoring
告警监视
fault diagnosis
故障诊断
performance monitoring
性能监测
report analysis
报告分析
archive/restore
存档/恢复
================================================================
PRESIDE BROADBAND OPERATORS (75320)
Preside Broadband 操作员教程
2 Days
Instructor Led
Overview
概述
This hands-on course provides the key skills that are required to operate the Preside
该课程提供操作Preside 所需关键技能
Audience
培训对象
any personnel who will have an involvement in the day to day operation of the Preside
准备从事Preside 日常管理操作人员
Prerequisites
课程基础
Experience in Higher Order Digital Transmission systems
学员应具有一定高阶数字传输体系经验
Objectives
目标
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Explain the essential functions of the Preside
掌握 Preside主要功能
Determine the hardware and network requirements
硬件配置和网络需求
Understand federated networks
了解联盟网络
Configure a network using the Graphical Network Editor
通过GNE 配置网络
Configure Partitioned Views Monitor a network using the Graphical Network Browser (GNB)
通过GNB监视网络,配置网络分割显示
Manage VC-4 and VC-12 connections
管理VC-4和VC-12的连接
Understand how the Preside can schedule and deliver software releases to any Element Controller
了解 Preside是如何确定任何网元控制器时间并向它们传送软件
Perform troubleshooting tasks using the Preside
通过 Preside完成故障处理
Course Summary
课程简介
Overview of the Preside
Preside概述
Network requirements
网络需求
Federated networks
联盟网络
Software installation
软件安装
Ethernet port configuration
通过以太网口配置
GNE o GNB
GNE o GNB
Partitioned views
网络分割显示
Connection management
连接管理
centralized software management
集中软件管理
Troubleshooting using the Preside
利用 Preside进行故障处理
================================================================
Trail Management for Preside Broadband Operators (75330)
Trail Management for Preside Broadband 操作员教程
1 Days
Instructor Led
Overview
概述
This hands on course provides the key skills that are required to operate Trail Management
该课程提供操作Trail Management 所需关键技能
Audience
培训对象
Any personnel who will have an involvement in the day to day operation of Trail Management.
准备从事Preside 日常管理操作人员
Prerequisites
课程基础
75320 Preside Broadband Operators
75320 Preside Broadband 操作员教程
Objectives
目标
On successful completion the student will be able to:
成功完成该课程学员将能做到以下几点:
Explain the essential functions of Trail Management
掌握Trail Management主要功能
Add and delete trails
增加和删除trails
Schedule trails
规划trails
Perform learn (audit using Trail Explorer)
使用Trail Explorer来监视网络
Compute trails using Trail Advisor
利用Trail Advisor计算 trails
Specify exclusions and diverse routing
定位路由
Course Summary
课程简介
Trail manager
Trail 管理员界面操作
Trail Advisor
Trail Advisor 界面
Trail monitor
Trail monitor 界面
Concatenated channels
通道连接
Wavelength Path Management
波长路径管理
================================================================
Preside Applications Platform Administration (5424)
Preside Applications Platform 管理员教程
2 Days
Instructor Led
Overview
概述
This course provides instruction and hands-on exercises on skills necessary to install, maintain, cofigure and manage the Preside Applications Platform (core software).
教材提供了关于Preside AP 平台核心软件的安装,维护,配置和管理的介绍及操作练习
Audience
培训对象
Preside system administrators and network operations center personnel.
Preside 系统管理员及网络操作中心人员
Prerequisites
课程基础
Basic knowledge of the product(s) to be monitored Basic UNIX and LAN/IP concepts
相关产品的基础知识,基本UNIX系统和局域网,IP的概念
Objectives
目标
On successful completion the student will be able to:
成功完成该课程学员将能做到以下几点:
Describe the purpose, functionality and related documentation of the Preside Applications Platform components
描述Preside AP组件的目的,功能和相关文档
Describe the Preside network architecture, including federation and CORBA concepts
描述Preside 网络结构,包括联盟工作和CORBA的概念
Configure a workstation for software installation
软件安装所需的工作站配置
Use the Preside administration script Configure CORBA components
应用Preside 管理脚本文件配置CORBA组件
Configure views using the GNE Manage network elements using the GNB
应用GNE设定GNB网络拓扑
Course Summary
课程简介
Preside Overview
Preside 简介
Preside network architecture
Preside 网络结构
Preside workstation configuration and software installation
工作站配置和软件安装
Preside Administration
Preside 管理
Using the graphical network editor (GNE) to configure views
应用GNE配置网络试图
Using the graphical network browser (GNB)
应用GNB
CORBA components configuration using AMGUI
应用AMGUI配置CORBA组件
Preside Trail Database Management (5428)
Preside Trail 数据库管理
2 Days
Instructor Led
Overview
概述
This course is an advanced Trail Management course that provides you with the skills and knowledge to configure Preside Trail Management. You will use the Trail Management user interface, Trail Monitor, Trail Explorer, Network Builder Tool Set and Node Modeller GUI to prepare and maintain Trail Management for users of the application.
这本高级Trail Management课程提供了Preside Trail Management设置所相关的知识和技能.您将应用以下应用软件完成Preside Trail Management配置,Trail Monitor, Trail Explorer, Network Builder,Node Modeller GUI,Trail Management user interface.
Audience
培训对象
Administrators of Trail Management who will be responsible to set up and maintain the Trail database
Trail management 管理员
Prerequisites
课程基础
Trail management operation course
Trail management 操作课程
Objectives
目标
On successful completion the student will be able to:
成功完成该课程学员将能做到以下几点:
Enrol the network into the database so all network elements and their endpoints are displayed in Trail Monitor
调用网络数据到数据库中,包括网元和节点信息
Populate the toplogy of the network into the database so that trails can be built across the network
为了网络中Trail 的建立,组建网络拓扑到数据库中
Create a passive element that can be enrolled into the database along with its endpoints
创建无源网元,提供数据库中必要的节点信息
Cut in a network element so that a trail can be built to include the new node
插入新网元到数据库中
Complete an endpoint cutover so that the in-conflict endpoint is resolved
完成节点剪切,解决数据库中存在冲突的节点信息
Use trail logs to determine the cause of errors and to recommend courses of action to take
通过Trail 纪录察看造成错误的原因
Course Summary
课程简介
Enroll the network
网络数据调用
Define physical network connectivity
定义物理网络连接
Use the Node Modeller GUI
应用NodeModeller图形界面
Resolve trails
Trails 解决
Cut in a network element
网元插入
Complete an endpoint cutover
节点剪切
Manage network changes
管理网络变化
================================================================
Preside Optical Power Management (75916)
Preside OPM操作员教程
1.5 Days
Instructor Led
Overview
概述
This one-day course provides the participants with the skills to use the Preside Optical Power Management graphical interface to analyze and troubleshoot Nortel Optera Long Haul optical amplifier systems.
此课程为大家提供了Preside Optical Power Management 图形界面应用技能,来分析和排除LH光放大器系统故障
Audience
培训对象
Network Operations Center personnel in charge of network monitoring, analysis and troubleshooting.
网管中心人员---负责网络监管,分析和故障排除
Prerequisites
课程基础
Preside broadband operator course (75320)
DX 4-FR operation and maintenance
LH operation and maintenance (75591)
Objectives
目标
On successful completion the student will be able to:
成功完成该课程学员将能做到以下几点:
Access the Optcal Power Management tool from Preside GNB interface.
从GNB界面访问OPM工具
Understand different Nortel optical amplifier architectures.
理解不同的北电光放大器体系
Recognize most important optical layer alarm conditions
识别重要光层告警
Assess optical power levels and other relevant optical layer parameters analyzing information presented through Optical Power Management interface
通过OPM界面读取光功率及分析相关的光层参数
Course Summary
课程简介
Interface Description
界面描述
Optical amplifier architecture description
光放大器体系描述
Optical amplifier parameters
光放大器参数
Optical amplifer alarms
光放大器告警
Retrieving, viewing and saving optical link information with Optical Power Management
收集,察看和保存OPM光链路信息
================================================================
Preside Optical Section View Topology Management (5429)
Preside OSV 数据库管理
1 Days
Instructor Led
Overview
概述
This course provides hands-on exercises to develop the skills to maintain and configure the Optical Section View (OSV) software and database. This includes the Node Modeller and Network Builder interfaces to populate the database as required by OSV.
此课程提供了为提高维护配置OSV软件,数据库技能的操作练习.包括Node Modeller和NetworkBuilder界面操作完善OSV数据库
Audience
培训对象
System admnistration personnel concerned with OSV and Preside view construction and maintenance
系统管理人员
Prerequisites
课程基础
Good UNIX knowledge in file manipulation. Basic knowledge of the Graphical Network Bowser (GNB) of Preside
UNIX文件操作,GNB的基本知识
Objectives
目标
On successful completion the student will be able to:
成功完成该课程学员将能做到以下几点:
List all the steps required for the proper deployment of the OSV Application and Database
列出所有OSV应用和数据库配置所需的全部步骤
Understand the Software Architecture of OSV
理解OSV软件体系
Understand the directory structure of OSV
理解OSV目录结构
Use the Node Modeller to emulate passive optical devices that are not normally visible to Preside
应用NodeModeller 模拟无源光设备
Use the Network Builder GUI to configure the OSV database information
应用Network Builder 用户界面配置OSV数据库信息
Course Summary
课程简介
OSV interface description
OSV 界面描述
OSV directory structure description
OSV 目录结构描述
Creating and verifying an OSV database
创建 和 检验OSV数据库
==============================================================================
Primary Training for Network Management System
初级网管培训
Curriculum Path 1
推荐课程1:
Duration: 3 days
总共课程时长:3 天
Class Size: Maximum 12, Minimum 6
班级规模: 最多12 人,最少 6 人
Audit:
培训对象:
The primary O&M (operations and maintenance) staff, working on the network management system
网管中心操作维护人员
Prerequisites:
课程基础
Basic knowledge of the product(s) to be monitored Basic UNIX and LAN/IP concepts
相关产品的基础知识,基本UNIX系统和局域网,IP的概念
Objectives:
培训目标:
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Master the essential functions and operations of the Preside
掌握 Preside主要功能和基本操作
Explain the essential functions of Trail Management
掌握Trail Management主要功能
Understand traffic configuration via Preside Application
通过Preside Application 应用平台进行业务配置
Perform products operations and daily maintenance work via Preside Application
通过 Preside进行日常操作及维护工作
Perform troubleshooting tasks using the Preside
通过 Preside完成故障处理
Curriculum Path 2:
推荐课程2:
Duration: 4 days
总共课程时长:4 天
Class Size: Maximum 12, Minimum 6
班级规模: 最多12 人,最少 6 人
Audit:
培训对象:
The primary O&M (operations and maintenance) staff, working on the network management system
网管中心操作维护人员
Prerequisites:
课程基础
Basic knowledge of the product(s) to be monitored Basic UNIX and LAN/IP concepts
相关产品的基础知识,基本UNIX系统和局域网,IP的概念
Objectives:
培训目标:
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Master the essential functions and operations of the Preside
掌握 Preside主要功能和基本操作
Explain the essential functions of Trail Management
掌握Trail Management主要功能
Understand traffic configuration via Preside Application
通过Preside Application 应用平台进行业务配置
Perform products operations and daily maintenance work via Preside Application
通过 Preside进行日常操作及维护工作
Perform troubleshooting tasks using the Preside
通过 Preside完成故障处理
Understand the Software Architecture of OSV
理解OSV软件体系
Use the Network Builder GUI to configure the OSV database information
应用Network Builder 用户界面配置OSV数据库信息
Recognize most important optical layer alarm conditions
识别重要光层告警
Assess optical power levels and other relevant optical layer parameters analyzing information presented through Optical Power Management interface
通过OPM界面读取光功率及分析相关的光层参数
=========================================================================
Senior Training for Network Management System
高级网管培训
Curriculum Path 1:
推荐课程1:
Duration: 5 days
总共课程时长:5 天
Class Size: Maximum 12, Minimum 6
班级规模: 最多12 人,最少 6 人
Audit:
培训对象:
The key staff for the network management system daily operation and maintenance
网管中心骨干操作维护人员
Prerequisites:
课程基础
Basic knowledge of the product(s) to be monitored Basic UNIX and LAN/IP concepts
相关产品的基础知识,基本UNIX系统和局域网,IP的概念
Objectives:
培训目标:
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Describe the purpose, functionality and related documentation of the Preside Applications Platform components
描述Preside AP组件的目的,功能和相关文档
Preside workstation configuration and software installation
工作站配置和软件安装
Describe the Preside network architecture, including federation and CORBA concepts
描述Preside 网络结构,包括联盟工作和CORBA的概念
Explain the essential functions of Trail Management
掌握Trail Management主要功能
Understand traffic configuration via Preside Application
通过Preside Application 应用平台进行业务配置
Enroll the network into the database so all network elements and their endpoints are displayed in Trail Monitor
调用网络数据到数据库中,包括网元和节点信息
Populate the toplogy of the network into the database so that trails can be built across the network
为了网络中Trail 的建立,组建网络拓扑到数据库中
Complete an endpoint cutover so that the in-conflict endpoint is resolved
完成节点剪切,解决数据库中存在冲突的节点信息
Manage network changes
管理网络变化
Curriculum Path 2:
推荐课程2:
Duration: 6 days
总共课程时长:6 天
Class Size: Maximum 12, Minimum 6
班级规模: 最多12 人,最少 6 人
Audit:
培训对象:
The key staff for the network management system daily operation and maintenance
网管中心骨干操作维护人员
Prerequisites:
课程基础
Basic knowledge of the product(s) to be monitored Basic UNIX and LAN/IP concepts
相关产品的基础知识,基本UNIX系统和局域网,IP的概念
Objectives:
培训目标:
On successful completion the student will be able to :
成功完成该课程学员将能做到以下几点:
Describe the purpose, functionality and related documentation of the Preside Applications Platform components
描述Preside AP组件的目的,功能和相关文档
Preside workstation configuration and software installation
工作站配置和软件安装
Describe the Preside network architecture, including federation and CORBA concepts
描述Preside 网络结构,包括联盟工作和CORBA的概念
Explain the essential functions of Trail Management
掌握Trail Management主要功能
Understand traffic configuration via Preside Application
通过Preside Application 应用平台进行业务配置
Enroll the network into the database so all network elements and their endpoints are displayed in Trail Monitor
调用网络数据到数据库中,包括网元和节点信息
Populate the toplogy of the network into the database so that trails can be built across the network
为了网络中Trail 的建立,组建网络拓扑到数据库中
Complete an endpoint cutover so that the in-conflict endpoint is resolved
完成节点剪切,解决数据库中存在冲突的节点信息
Manage network changes
管理网络变化
Understand the Software Architecture of OSV
理解OSV软件体系
Use the Network Builder GUI to configure the OSV database information
应用Network Builder 用户界面配置OSV数据库信息
Recognize most important optical layer alarm conditions
识别重要光层告警
Assess optical power levels and other relevant optical layer parameters analyzing information presented through Optical Power Management interface
通过OPM界面读取光功率及分析相关的光层参数
APPENDIX 1: Lab and Classroom
附录1:实验室与教室
APPENDIX 2: Registering for Courses
附录2:课程申请
Course Registration
课程注册
Course registrations are accepted via fax, mail or email. Walk- in and phone student registration are not accepted. In registering for a course, the customer accept these training terms and conditions and agrees that no other terms and conditions apply.
如果您有培训需求,您可以采用传真,信件或电子邮件与我们联系,电话申请将不被接受.同意我们相应的培训条款.
Course Confirm
课程确认
Tuition payment arrangements must be finalized at the time of booking a course. All registration will be confirmed after receipt of the sign of Training Agreement .
当用户接受方案, 培训中心收到付款后, 培训中心将安排培训服务的细节.
Cancellations
取消
Courses can be rescheduled or cancelled without penalty up to 7 working days for instructor delivered training prior to the course start date. Full tuition will apply for cancellations / rescheduling fewer than 7 working days for instructor delivered training before the course start date.
如想取消或重新排课,请在开课前7个工作日以书面形式通知培训中心, 避免损失, 这包括用户的违约金.
Contact Address 联系地址:
Shenyang Nortel 中国沈阳市
Telecommunications Co.,Ltd. 和平区南十马路79号
79 Nanshi Street 沈阳北电通信有限公司
Heping District
Shenyang China
Code:110005 邮编:110005
Tel: 86-024-23390425 电话:86-024-23390425
Fax:86-024-23390426 传真:86-024-23390426
Linkman: Casey Chen 联系人:陈洪波
Details of public course schedules for Nortel Networks and our Educational Training Partners are updated regularly and are published on the Nortel Networks web site: http://www.nortel.com/training
欢迎登陆http://www.nortel.com/training 查阅北电网络培训的相关信息
Optical Training Catalog 2006
Preside Optical Power Management (75916) 75916
Preside Optical Section View Database Management (5429) 5429
Trail Management for Preside Broadband Operators (75330) 75330 (5428)
Preside Trail Database Management (5428) 5428
Preside Optical Power Management (75916) 75916
Preside Optical Section View Database Management (5429) 5429
Preside Applications Platform Administration (5424)5424
Trail Management for Preside Broadband Operators (75330) 75330
Preside Broadband Operators (75320)75320
Trail Management for Preside Broadband Operators (75330) 75330
Preside Trail Database management (5428)5428
Trail Management for Preside Broadband Operators (75330) 75330 (5428)
Preside Applications Platform Administration (5424)5424
Preside Broadband Operators (75320) 75320
立刻下载此文档